Emergency Alert Radio - EAR
Home | About | Features | Product Specs | Software | Order | Contact

Configuration Set-up - Screen Images

The EAR comes Pre-Programmed for your area,
but you can re-program it using your own computer.

Download the EAR Configuration Software

The Emergency Alert Radio Set-up Program is a Windows program which
communicates with the radio by a serial data cable. The main screen is shown here:

The set-up program configures EAR's radio receiver to listen to
local Emergency Alert System frequencies or a nearby National Weather Service station.
The EAR set-up program already knows the frequencies available.
You need only select the appropriate primary and alternate frequencies from a drop-down list.

EAR can be configured to reset automatically after the alert message
or to remain active until the front panel button is pressed.
EAR can automatically switch to an alternate frequency if the primary broadcast signal is lost.
EAR's radio can be manually changed at any time using the front panel button.
EAR responds to events affecting one or more of the four locations selected as shown here:

EAR Configuration showing selection of county subdivisions

Download the EAR Configuration Software

another MTS product